DP60-W Screw-Out Deck Plate

$33.80

SKU: DP60-W Category:

Description

Supporting safety and reliability aboard, Beckson pry-out and screw-out deck plates in all sizes are now certified by independent lab testing to exceed FIVE certifications! ABYC H-3 Watertightness, ABYC H-4, NEMA 250 6P Submergence, ISO 12216 and ISO 11812


Though deck plates are no new invention, Beckson was the first to conquer all three safety features. First, a cover that would not open unexpectedly. Second, maximum water tightness. Third, prevent jamming closed or cross- threading that would prevent a cover from being closed.

The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.

A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Deck plates also are used for access, inspection, and clean out for tanks and compartments, or just as a general access for shut-off valves or back- fastenings. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the plate.


6″ Deck Plate with Standard Trim Ring
Outside Diameter: 8 1/8″ (20.6 cm) Inside Diameter: 6″ (15.2 cm) Hole Cut: 6 1/2″ (16.5 cm)
Thin Rim with or without screw holes may be available in some color / material combinations. Thin rim OD is 7.50″

 

Additional information

Weight .7 lbs
Dimensions 9 × 9 × .5 in