Beckson developed the first pry-out deck plate as an access cover to its permanently mounted pump. These pry-out plates were designed with an extra heavy O-ring to assure a water tight fit.
Plates are provided with non- skid or smooth surfaces for different installation requirements. The Diamond Pattern Deck Plate takes a proven watertight product a step further. The non-skid pattern extends across the center, eliminating the edge ring that traps dirt and debris. Rain and spray keep the non-skid surface clean.
Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the plate. Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present.
Supporting safety and reliability aboard, Beckson pry-out and screw-out deck plates in all sizes are now certified by independent lab testing to exceed FIVE certifications! ABYC H-3 Watertightness, ABYC H-4, NEMA 250 6P Submergence, ISO 12216, ISO 11812
6″ Pry-out Deck Plate – Standard Trim Ring Replacement Gasket = D6P-G
Outside Diameter: 8 1/8″ (15.6 cm) Inside Diameter: 6 3/16″ (15.5 cm) Hole Cut: 6 1/2″ (16.5 cm)
Thin Rim with or without screw holes may be available in some color / material combinations. Thin rim OD is 7.50″
8″ Pry-out Deck Plate – Standard Trim Ring Replacement Gasket = D8P-G
Outside Diameter: 10″ Inside Diameter: 8″ Hole Cut: 8 1/2″
No thin rim available.
OEM Note: Specials color/materials and logo centers are available.